For viewing the documentation in a pdf you need to install Adobe Acrobat Reader. It can be download here:
IR2130
3 Phase Driver, Inverting Input, 2.5us Deadtime in a 28-pin DIP package (Voffset=600V, Vout=10-20V, t=675ns).
The IR2130/IR2132(J)(S) is a high voltage, high speed
power MOSFET and IGBT driver with three independent
high and low side referenced output channels. Proprietary
HVIC technology enables ruggedized
monolithic construction. Logic inputs are compatible with
CMOS or LSTTL outputs, down to 2.5V logic. A
ground-referenced operational amplifier provides
analog feedback of bridge current via an external current
sense resistor. A current trip function which terminates
all six outputs is also derived from this resistor.
An open drain FAULT signal indicates if an over-current
or undervoltage shutdown has occurred. The output drivers feature a high pulse current buffer stage designed
for minimum driver cross-conduction. Propagation delays are matched to simplify use at high frequencies. The
floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration
which operate up to 600 volts.
Single High Side Driver, Inverting Inputs, Current Sensing, Overcurent Detection and Shutdown Fault Output in a 8-lead SOIC package (Voffset=600V(max), Io=+200mA/-420mA, Vout=9-20V, ton/off=200/150ns).
Single High Side Driver, Inverting Inputs, Current Sensing, Overcurent Detection and Shutdown Fault Output in a 8-lead SOIC package (Voffset=600V(max), Io=+200mA/-420mA, Vout=9-20V, ton/off=200/150ns).
Total 204 Datasheets
